ECS2020 Series CLI Reference Guide-R04

176
poe timer configuration
Use this command to set the PoE timer mode.
NULL
Interface configuration mode
Use the command to set the PoE power supply time.
ECS2020-10P(config)# poe timer enable
ECS2020-10P(config)# interface GigabitEthernet 0/5
ECS2020-10P(config-if-GigabitEthernet0/5)# poe timer periodic everyday 8:30 to 19:30
mon to wed
ECS2020-10P(config-if-GigabitEthernet0/5)# poe timer absolute start 08:30 jul 25 2017 stop
18:30 sep 30 2017
Parameter
Parameter
Description
absolute
Sets the PoE power to the absolute time.
periodic
Sets the PoE power cycle time.
Command
Command
Description
show poe timer
View the configuration information of
the interface PoE timer information.
Default
Mode
Usage
Example