ECS2020 Series CLI Reference Guide-R04

173
poe max-power
Use this command to set the system maximum power.
poe max-power no poe max-powe
Default 35W
Mode Interface configuration mode
Usage Use this command to configure the maximum power of the port.
Example
ECS2020-10P(config)# interface GigabitEthernet 0/1
ECS2020-10P(config-if-GigabitEthernet0/1)# poe max-power 20
Parameter
Parameter
Description
int
Maximum power in the range <6,11,20,32,35W>
Command
Command
Description
show poe interfaces configuration
View the PoE interface
configuration information.