ECS2020 Series CLI Reference Guide-R04

124
ipv6 mld snooping vlan immediate-leave
Use this command to enable the mld snooping vlan immediate-leave function. If there is only
one member of the group, and the device receives a leave packet from a member, then the
group will leave immediately.
ipv6 mld snooping vlan immediate-leave
Disabled
Global configuration
Use the ipv6 mld snooping vlan immediate-leave command to enable the vlan
immediate leave function. Groups will remove ports immediately when receiving a leave
packet.
Use the no form of this command to disable it.
You can verify settings by using the show ipv6 mld snooping vlan command.
The following example specifies to set ipv6 mld snooping vlan immediate-leave on
VLAN 1： ECS2020-10P(config)# ipv6 mld snooping vlan 1 immediate-leave
ipv6 mld snooping report-suppression
Use this command to enable the mld snooping report-suppression function, a router port will
just forward one report packet when receiving many from the same group join packet. This
function is invalid if mld snooping is set to Version 2.
ipv6 mld snooping
report-suppression
no
ipv6 mld snooping
report-suppression
Enabled
Global configuration
Parameter
parameter
description
VLAN-LIST
Specifies a VLAN ID list to set
Command
command
Description
show ipv6 mld snooping
Display the settings of ipv6 mld
snooping.
Parameter
parameter
description
None
None
Default
Mode
Usage
Example
Default
Mode