ECS2020 Series CLI Reference Guide-R04

122
27 MLD Snooping
27.1 MLD Snooping configuration commands
ipv6 mld snooping
Use this command to enable mld snooping in global configuration mode, and use the "no" form
of the command to disable mld snooping.
ipv6 mld snooping
no ipv6 mld snooping
Enabled
Global configuration
Use command ipv6 mld snooping to enable the igmp snooping function for IPv6
.
Use the no form of this command to disable it
. Disabling MLD snooping will clear all ipv6
mld snooping dynamic groups and dynamic router port,and set all the static ipv6 mld group
as invalid. Also dynamic group and router ports by mld message will not be learned
You can verify settings by using the show ipv6 mld snooping command
.
ECS2020-10P(config)# ipv6 mld snooping
ECS2020-10P(config)# no ipv6 mld snooping
ipv6 mld snooping version
Command ipv6 mld snooping version sets the MLD snooping version in global configuration mode.
ipv6 mld snooping version (1|2)
Version 1
Global configuration
.
Parameter
command
Description
None
None
Command
command
Description
show ipv6 mld snooping
Display the settings of ipv6 mld
snooping.
Parameter
command
Description
(1|2)
MLD version 1 or version 2 mode
Default
Example
Default
Mode
Usage
Mode