ECS2020 Series CLI Reference Guide-R04

113
The following example specifies to set the ip igmp snooping querier robustness-variable：
ECS2020-10P(config)#
ip igmp snooping vlan 1 robustness-variable 5
ip igmp profile
Adds an igmp profile to permit or deny some groups.
ip igmp profile <1-128>
no Ip igmp profile <1-128>
No profile exists by default.
Global configuration
.
Use the ip igmp profile command to enter profile configuration.
Use the no form of this command to delete profile.
You can verify settings by the show ip igmp profile command.
The following example specifies to set the ip igmp snooping profile test：
ECS2020-10P(config)# ip igmp profile 1
Command
Command
Description
Show ip igmp snooping
Display the IGMP snooping settings.
Parameter
Parameter
Description
<1-128>
Specifies profile ID
Command
Command
Description
show ip igmp profile
Display the IGMP profile settings.
Example
Default
Mode
Usage
Example