ECS2020 Series CLI Reference Guide-R04

109
The following example specifies to set ip the igmp snooping querier version：
ECS2020-10P(config)#
ip igmp snooping vlan 2 querier version 3
ip igmp snooping vlan querier last-member-query-count
Use this command to set the igmp snooping querier last-member-query-count.
ip igmp snooping vlan VLAN-LIST querier last-member-query-count <1-7>
no ip igmp snooping vlan VLAN-LIST querier last-member-query-count
2
Global configuration
.
Use the ip igmp snooping vlan querier last-member-query-count command to change
how many query packets will send.
Use the no form of this command to restore to default.
You can verify settings by the show ip igmp snooping vlan command.
The following example specifies to set the ip igmp snooping querier last-member-query-
count test：
ECS2020-10P(config)#
ip igmp snooping vlan 2 querier
last-member-query-count 5
Command
Command
Description
Show ip igmp snooping querier
Display the IGMP snooping settings.
Parameter
Parameter
Description
VLAN-LIST
Specifies VLAN ID list to set
last-member-query-count<1-7>
Specifies last member query count to set
Command
Command
Description
Show ip igmp snooping querier
Display the IGMP snooping settings.
Example
Default
Mode
Usage
Example