ECS2020 Series CLI Reference Guide-R04

105
ip igmp snooping vlan mrouter
Adds a static router port for a VLAN.
ip igmp snooping vlan
VLAN-LIST
mrouter
interfaces GigabitEthernet|Aggregateport
IF_PORTS
No
ip igmp snooping vlan
VLAN-LIST
mrouter
interfaces
GigabitEthernet|Aggregateport IF_PORTS
None static router ports by default.
Global configuration
.
Use the ip igmp snooping vlan mrouter command to add a static router port. All query
packets will be forwarded to this port .
Use the no form of this command to delete static router port.
You can verify settings by the show ip igmp snooping vlan command.
The following example specifies that set ip igmp snooping
static router port
test：
ECS2020-10P(config)# ip igmp snooping vlan 2 mrouter interfaces GigabitEthernet
0/5
Command
Command
Description
Show ip igmp snooping vlan
Display the IGMP snooping settings.
Parameter
Parameter
Description
VLAN-LIST
Specifies a VLAN ID list to set
IF-PORTS
Specifies a port list to set or remove
Default
Mode
Usage
Example