ECS2020 Series CLI Reference Guide-R04

100
26 IGMP Snooping
When configuring IGMP Snooping, use the web manager for general settings and the CLI
commands for both general and detailed settings.
26.1 command related to configuration
ip igmp snooping
Enables IGMP snooping in global configuration mode. Use the "no" to the command to disable
IGMP snooping.
ip igmp snooping
no ip igmp snooping
Parameter
Parameter
Description
None
None
Enabled
Global configuration
.
Use the command ip igmp snooping to enable the
IGMP
snooping
function
.
Use the no form of this command to disable
it.
You can verify the settings by using the show ip igmp snooping command
.
ECS2020-10P(config)# ip igmp snooping
ECS2020-10P(config)# no ip igmp snooping
ip igmp snooping version
Sets the IGMP snooping version in global configuration mode.
ip igmp snooping version (2|3)
version 2
Global configuration
.
Command
Command
Description
show ip igmp snooping
Show the settings of IGMP snooping.
Parameter
Parameter
Description
(2|3)
IGMP version 2 or version 3 mode
Default
Mode
Example
Default
Mode
Usage