ECS2020 Series CLI Reference Guide R04

67
19 ONVIF
19.1 Configure commands
ONVIF enable
In global configuration mode, enables ONVIF and activates IPC and NVR discovery.
surveillance-vlan-v2
Disabled
Global configuration mode
Use this command to configure and enable NVR and IPC auto discovery
ECS2020-28P(config)# surveillance-vlan-v2
ECS2020-28P(config)# no surveillance-vlan-v2
ONVIF vlan
surveillance-vlan-v2 vlan
Parameter
Parameter
Description
surveillance-vlan-v2
Activate NVR and IPC auto discovery
Command
Command
Description
show surveillance-vlan-v2 onvif discover-port
Display ONVIF information
Parameter
Parameter
Description
vlan id
<2-4094> Specifies the Surveillance VLAN v2
VLAN ID
Default
Mode
Usage
Example
Default