ECS2020 Series CLI Reference Guide R04
57
NULL
ECS2020-10P(config)# interface GigabitEthernet 0/1
ECS2020-10P(config-if-GigabitEthernet0/1)# switch hybrid vlan 3 untagged
Hybrid native VLAN
Specify a native VLAN as a hybrid port. Use the no option of this command to restore the hybrid
property of the interface to the default value.
switch hybrid native vlan vlan-id
no switch hybrid native vlan
Default native VLAN is VLAN 1
Interface configuration mode
To configure the hybrid native VLAN of a port, the port must be configured as hybrid.
ECS2020-10P(config)# interface GigabitEthernet 0/1
ECS2020-10P(config-if-GigabitEthernet0/1)# switch hybrid native vlan 3
Command
Command
Description
show vlan
Displays the VLAN
configuration.
Parameter
Parameter
Description
no
Restore Hybrid default VLAN
Command
Command
Description
show vlan
Display configuration of vlan
information
Usage
Example
Default
Mode
Usage
Example