ECS2020 Series CLI Reference Guide R04

235
Show fiber-info
Use this command to view the fiber port and fiber information such as fiber mode, baud rate, fiber
type etc…
show fiber-info interfaces GigabitEthernet port-id
parameter
Default None
Mode Privilege configuration mode
Usage Used to view the fiber port and fiber type information.
Example ECS2020-10T# show fiber-info interfaces gig 0/9
fiber information
Connector Type : LC
Fiber Type : Single Mode
Eth Compliance Codes : 1000BASE-LX
Baud Rate : 1300Mbd
Wave Length : 1310nm
Vendor OUI : 00-00-45
Vendor Name : EDGE-CORE
Vendor PN : ET4202-LX
Vendor Rev :
Vendor SN : F171020154
Date Code : 17-03-07
Parameter
Description
port-id
Chose the fiber port to view info