Manualshelf

ECS2020 Series CLI Reference Guide R04

ManualsBrandsEdgecore Networks ManualsEnterprise10/28 GIGABIT WEB-SMART ETHERNET SWITCH
191192193194195196197198199200
199
Interface configuration mode
Use the command“lldp tlv-select vlan-name” to add or remove VLAN names to the
VLAN list of the 802.1 VLAN-NAME TLV. The configuration can be
viewd by using the comamnd“show lldp”.
ECS2020-10P(config-if-GigabitEthernet0/1)# lldp tlv-select vlan-
name add 1
ECS2020-10P(config-if-GigabitEthernet0/1)# no lldp tlv-select
lldp tx
Use this command to enable a port to work in transmission mode so that the device only sends
LLDP packets that do not accept
neighbor devices to send LLDP packets. Use the no form of
the command to set the LLDP TX mode to default.
lldp tx
no lldp tx
Disabled
Interface configuration mode
Command
Command
Description
show lldp interfaces GigabitEthernet 0/1
Displays the LLDP information.
Parameter
Parameter
Description
Null
Null
Default
Mode
Mode
Usage
Example