ECS2020 Series CLI Reference Guide R04
171
35 POE commands
35.1
configure command
PoE enable
Use this command to enable the power supply capability
of a PoE port.
poe enable
no poe enable
Enabled
Interface configuration mode
Use this command to enable or disable the remote power supply capability of the port.
ECS2020-10P(config-if-GigabitEthernet0/1)# poe enable
ECS2020-10P(config-if-GigabitEthernet0/1)# no poe enable
Parameter
Parameter
Description
poe enable
Enables the PoE power supply function, the default is
on.
no poe enable
Turns off the PoE power supply.
Command
Command
Description
show poe interfaces configuration
Display the configuration information of
current interface PoE
Default
Mode
Usage
Example