ECS2020 Series CLI Reference Guide R04

128
The following example specifies to set ipv6 mld snooping
static group for VLAN1.
ECS2020-10P(config)# ipv6 mld snooping vlan 1 static-group ff08::9 interfaces
Aggregateport 0/6
27.2
Commands related to display and monitoring
clear ipv6 mld snooping statistics
Use this command to the clear ipv6 mld statistics.
clear ipv6 mld snooping statistics
None
.
Privileged EXEC
This command will clear all of the ipv6 mld packets statistics.
You can verify settings by using the show ipv6 mld snooping statistics command.
The following example specifies to show the ipv6 mld snooping statistics.
ECS2020-10P#clear ipv6 mld snooping statistics
ECS2020-10P#show ipv6 mld snooping
Snooping
: Enabled
Report Suppression : Enabled
Operation Version : v1
Forward Method : mac
Unknown IPv6 Multicast Action : Flood
Packet Statistics
Example
Total RX
: 0
Valid RX
: 0
Invalid RX
: 0
Other RX
: 0
Leave RX
: 0
Report RX
: 0
Command
command
description
Show ipv6 mld snooping groups.
Verify the static group information.
Parameter
parameter
description
None
Clears all igmp packets statistics.
Example
Default
Mode
Usage