ECS2020 Series CLI Reference Guide R04

126
ipv6 mld snooping vlan static-router-port
Use this command to add a static router port for a VLAN.
ipv6 mld snooping vlan
VLAN-LIST
static-router-port GigabitEthernet|Aggregateport
IF_PORTS
No
ipv6 mld snooping vlan
VLAN-LIST static-router-port GigabitEthernet|Aggregateport
IF_PORTS
No static router ports
Global configuration
Use the ipv6 mld snooping vlan static-router-port command to add a static router port.
All query ackets will be forwarded to this port. Use the no form of this command to delete
static router port. You can verify the settings by using the show ipv6 mld snooping
router command.
The following example specifies to set the ipv6 mld snooping
static router port
to
Ethernet port 0/5 for VLAN 2：
ECS2020-10P(config)# ipv6 mld snooping vlan 2 static-router-port GigabitEthernet
0/5
ipv6 mld snooping vlan router learn
Use this command to enable learning router ports by using routing protocol packets such as
PIM/PIMv2,DVMRP, or MOSPF. Use the no form of this command to disable it.
ipv6 mld snooping vlan
VLAN-LIST
mrouter learn pim-dvmrp
No
ipv6 mld snooping vlan
VLAN-LIST
mrouter learn pim-dvmrp
Parameter
parameter
description
VLAN-LIST
Specifies a VLAN ID list to set.
IF-PORTS
Specifies a port list to set or remove.
Command
command
description
Show ipv6 mld snooping router
Verify the ipv6 mld snooping router
Information.
Parameter
parameter
description
VLAN-LIST
Specifies a VLAN ID list to set.
IF-PORTS
Specifies a port list to set or remove.
Default
Mode
Usage
Example