ECS2020 Series CLI Reference Guide R04

112
125
Global configuration
Use the ip igmp snooping vlan querier query-interval command to set the
interval between each query.
Use the no form of this command to restore it to default.
You can verify settings by the show ip igmp snooping vlan command.
The following example specifies to set the ip igmp snooping querier version test：
ECS2020-10P(config)#
ip igmp snooping vlan 2 querier
query-interval 200
ip igmp snooping vlan robustness-variable
Use this command to set the igmp snooping querier robustness-variable.
ip igmp snooping vlan VLAN-LIST robustness-variable <1-7>
no ip igmp snooping vlan VLAN-LIST robustness-variable
2
Global configuration
.
Use the ip igmp snooping vlan robustness-variable command to set the retry
times. Use the no form of this command to restore it to default.
You can verify settings by the show ip igmp snooping vlan command.
Command
Command
Description
Show ip igmp snooping
Display the IGMP snooping settings.
Parameter
Parameter
Description
VLAN-LIST
Specifies VLAN ID list to set.
robustness-variable <1-7>
Specifies a robustness value to set.
Default
Mode
Usage
Example
Default
Mode
Usage