ECS2020 Series CLI Reference Guide R04

110
ip igmp snooping vlan querier last-member-query-interval
Use this command to set the igmp snooping querier last-member-query-interval.
ip igmp snooping vlan VLAN-LIST querier last-member-query-interval <1-25>
no ip igmp snooping vlan VLAN-LIST querier last-member-query-interval
1
Global configuration
.
Use the ip igmp snooping vlan querier last-member-query-interval command to set
interval between each query packet.
Use the no form of this command to restore it to default.
You can verify settings by the show ip igmp snooping vlan command.
The following example specifies to set the ip igmp snooping querier last-member-query-
interval test：
ECS2020-10P(config)#
ip igmp snooping vlan 2 querier
last-member-query-interval 10
Parameter
Parameter
Description
VLAN-LIST
Specifies VLAN ID list to set.
last-member-query-interval <1-
25>
Specifies last member query interval to set.
Command
Command
Description
Show ip igmp snooping querier
Display the IGMP snooping settings.
Default
Mode
Usage
Example