ECS2020 Series CLI Reference Guide R04

106
ip igmp snooping vlan mrouter learn
Use this command to enable learning router port by routing protocol packets such as
PIM/PIMv2,DVMRP,MOSPF. Use the no form of this command to disable it.
ip igmp snooping vlan
VLAN-LIST
mrouter learn pim-dvmrp
no
ip igmp snooping vlan
VLAN-LIST
mrouter learn pim-dvmrp
Enabled
Global configuration
.
Use the ip igmp snooping vlan mrouter learn pim-dvmrp command to enable learning
router port by routing protocol packets such as PIM/PIMv2,DVMRP,MOSPF.
Use the no form of this command to disable it.
You can verify settings by using the show ip igmp snooping vlan command.
The following example specifies to
enable the learning router port
test：
ECS2020-10P(config)# ip igmp snooping vlan 2 mrouter learn pim-dvmrp
Command
Command
Description
Show ip igmp snooping vlan
Display the IGMP snooping settings.
Parameter
Parameter
Description
VLAN-LIST
Specifies a VLAN ID list to set
IF-PORTS
Specifies a port list to set or remove.
Command
Command
Description
Show ip igmp snooping vlan
Display the IGMP snooping settings.
Default
Mode
Usage
Example