ECS2020 V1.0.2.11 SWR Release Note

ENGINEERING RELEASE NOTES
6/2000 P/N: 9038023-04 Subject to Change Without Notice
Page: 7 of 6
F0615-E
9752
option2: due to default ONVIF is disabled, left the VLAN ID value to empty
2
9752
Disconnections that are not timeout related
3
9752
Webpage was saved but the table doesn't actually update
4
9752
Sometimes the device image wouldn't fully load (Chrome version Version
80.0.3987.132)
5
9752
Sometimes the port statistics table was empty
6
9752
"VLAN can only increase one item once" modify to "VLANs need to be added
one at a time"
7
9752
Loopback detection should be enabled by default
8
9752
log flash is enabled by default
9
9752
LLDP is enabled by default
10
9752
EEE should be enabled by default
11
Port default mode error
------------------
端口默認模式錯誤
In the early version, the port was in access mode by default. Later, in order
to add the onvif function, all ports were changed to hybrid mode. In this
way, the access configuration of the original port cannot be loaded directly.
Version 1.0.2.6 changes the port default mode to access mode.
-----------------------------------------------------------------
早期版本端口默认是 ACCESS 模式，后来为了增加 onvif 功能把所有端口修改为
hybrid 模式。这样原先端口的 ACCESS 配置就无法直接加载。1.0.2.6 版本重新把端
口默認模式修改 ACCESS 模式。
Runtime V1.0.2.5, Loader V1.00.002
EPR
Headline
1
11957
Reboot or power cycle will cause DHCP Pool back to default
2
11692
"ONVIF occupy VLAN 2
option1: change default to other VLAN
option2: due to default ONVIF is disabled, left the VLAN ID value to empty"
3
Solve the problem that
different models can
upgrade each other
----------------------
解決不同機型可以相互之
間進行版本升級的問題