ECS2020 Series Web Management Guide R04

109
Figure 7-50: LLDP MED Port Set
To configure MED port settings, follow these steps:
Step 1: Select a port to configure it.
Step 2: Set the status to “Enabled.”
Step 3: Enable TLVs and configure the details where required.
Step 4: Click the "Apply" button to complete the configuration.
7.10 ADMINISTRATION
7.10.1 Telnet Information
Click on the "System Management" "Administration, "Administration Settings" can view the Telnet settings
information. This feature is turned off by default.
Figure 7-51: Telnet Information