ECS2020 Series Web Management Guide R04

100
7.7.6 Configure the SNMP Engine ID
After open SNMP, select the Engine ID, enter a valid ID or click the “Default ID” button.
Figure 7-31: Engine ID Configuration
To configure the Engine ID, follow these steps:
Step 1: Select the "ON" option.
Step 2: Enter a valid ID number. Specify an engine ID by entering 10 to 64 hexadecimal characters. Alternatively, click
the “Default ID” button to restore and use the default ID.
Step 3: Click the "Apply" button to complete the configuration.
7.7.7 Configure the Remote Engine ID
After open SNMP, select the Remote Engine ID configuration.
Figure 7-32: Remote Engine ID Configuration