ECS2020 Series CLI Reference Guide R04

98
25 ipv6 Client
25.1 Configure commands
ipv6 client
Configure the switch as an IPv6 DHCP client.
Ipv6 dhcp
no ipv6 dhcp
ipv6 autoconfiguration
no ipv6 autoconfiguration
disable
Global configuration mode
In the global configure mode, enable ip dhcp so the switch can be allocated an IPv6
address from a connected DHCP server.
ECS2020-10P(config)# ipv6 dhcp
ECS2020-10P(config)# ipv6 autoconfiguration
24.1 Display relevant commands
24.1.1 show ipv6 DHCP
Displays the IPv6 DHCP status.
Show ip dhcp
Show ipv6
Parameter
Parameter
Description
Ipv6 dhcp
Enable ipv6 dhcp client
no ipv6 dhcp
Disable ipv6 dhcp client
autoconfiguration
Enable Ipv6 auto-configuration
No ipv6 autoconfiguration
Disable Ipv6 auto-configuration
Command
Command
Description
show ipv6 dhcp
Displays the IPv6 DHCP
client configuration.
Default
Mode
Example
Usage