ECS2020 Series CLI Reference Guide R04

190
37 lldp settings
37.1 lldp settings
LLDP enable
This command enables LLDP. LLDP is a Layer 2 protocol that allows network devices to
advertise their own device identities and performance on the local subnet.
lldp
no lldp
Enabled
Global configuration mode
Use the “lldp” command to enable LLDP RX/TX ability. The LLDP enabled
status is displayed by using the “show lldp” command. Use the no form of
this command to disable LLDP.
ECS2020-10P(config)# lldp
ECS2020-10P(config)# no lldp
lldp rx
When the port works in Rx. mode, the device only receives non-sending neighbor devices to
send LLDP packets.
lldp rx
no lldp rx
Parameter
Parameter
Description
Null
Null
Command
Command
Description
show lldp
Displays the LLDP information.
Parameter
Parameter
Description
-
-
Default
Mode
Usage
Example