ECS2020 Series CLI Reference Guide R04

184
ECS2020-10P(config)# snmp-server host 192.168.100.149 traps
version 1 test
ECS2020-10P(config)# no snmp-server host 192.168.100.149 traps
version 1 test
snmp trap auth
Use this command to enable sending a trap (authTrap) message when an authemtication fails on the
switch. Use the no option for this command and the SNMP function will not issue an authTrap.
snmp trap auth
no snmp trap auth
Enabled – authTraps will be sent on authentication failure.
Global configuration mode.
When the function is turned on, if auth fails to change, SNMP will be issued
AuthTrap
ECS2020-10P(config)# snmp trap auth
ECS2020-10P(config)# no snmp trap auth
Command
Command
Description
show snmp host
View the SNMP host settings
configured on the switch.
parameter
Parameter
Description
Null
Null
Command
Command
Description
show snmp trap
Views the snmp trap configuration.
Example
Default
Mode
Usage
Example