ECS2020 Series CLI Reference Guide R04

180
36 SNMP command
36.1 SNMP configuration commands
snmp enable
Use this command to enable the SNMP agent on the switch.
Snmp enable
Disabled
Global configuration mode
Use this command to configure and enable the SNMP agent, an IPv6 SNMP agent
is enabled at the same time.
Example ECS2020-10P(config)# snmp enable
Parameter
Parameter
Description
snmp enable
Enables the SNMP agent, the default is off
Command
Command
Description
show snmp
Views the current SNMP status.
Default
Mode
Usage