ECS2020 Series CLI Reference Guide R04

151
authentication host-mode
Use this command to configure the 802.1X host-mode at the interface level.
interface GigabitEthernet {port_id}
authentication host-mode {single-host|multi-host|multi-auth} interface
GigabitEthernet {port_id}
no authentication host-mode
multi-auth
interface configuration mode
Configuration 802.1X
port-control mode.
interface GigabitEthernet 0/3
authentication host-mode multi-host
30.2 Display commands
show authentication
Use this command to display the 802.1x configuration.
show 802.1X information.
show authentication {interfaces GigabitEthernet port_id}
Parameter
Parameter
Description
port_id
Interface ID
single-host
Single Host Mode
multi-host
Multiple Host Mode
multi-auth
Multiple Authentication Mode
Command
Command
Description
show authentication interface
GigabitEthernet port_id
Displays the 802.1x port information.
Parameter
Parameter
Description
port_id
Interface ID
Default
Mode
Example
Usage