ECS2020 Series CLI Reference Guide R04

149
30 802.1X
Note: 802.1X requires an 802.1x RADIUS server to be configured.
30.1 Configure commands
authentication dot1x
Use this command to enable 802.1x authentication. Use the no form of the command to
disable it.
authentication dot1x
no authentication dot1x
Null
Global Configuration
Configuration 802.1X
authentication dot1x
n
authentication dot1x
Use this command to turn on 802.1x authentication on a port at the interface level.
interface GigabitEthernet {port_id}
authentication dot1x
interface GigabitEthernet {port_id}
no authentication dot1x
Parameter
Parameter
Description
Null
Null
Parameter
Parameter
Description
port_id
Interface ID
Command
Default
Mode
Example
Usage
Command
Description
Show authentication
Displays the 802.1x information.