ECS2020 Series CLI Reference Guide R04

129
General Query RX : 0
Specail Group Query RX : 0
Specail Group & Source Query RX : 0
Leave TX : 0
Report TX : 0
General Query TX : 0
Specail Group Query TX : 0
Specail Group & Source Query TX : 0
clear ipv6 mld snooping groups
Use this command to clear the mld snooping groups.
clear ipv6 mld snooping groups [(dynamic|static)]
None
.
Privileged EXEC
This command will clear the mld groups for either dynamic, static or both
types. You can verify the settings by using the show ipv6 mld snooping
groups command.
The following example specifies to clear the ipv6 mld snooping groups.
ECS2020-10P#clear ipv6 mld snooping groups
ECS2020-10P#show ipv6 mld snooping groups
VLAN | Group IP Address | Type | Life(Sec) | Port
------+------------------+--------+-----------+------------------
Total Number of Entry = 0
Command
Command
Description
Show ipv6 mld snooping
Verifys ipv6 mld statistics information.
Parameter
parameter
description
None
Clears the ipv6 mld groups include dynamic and static.
(dynamic|static)
Ipv6 mld group is specified as either dynamic or static.
Command
command
description
Show ipv6 mld snooping
groups
Verify mld snooping groups information.
Default
Mode
Usage
Example
Example