ECS2020 Series CLI Reference Guide R04

125
Use the ipv6 mld snooping report-suppression command to enable the report-
suppression function.
Use the no form of this command to disable it. Disable report -supression will forward
all received reports to vlan router ports.
You can verify settings by the show ipv6 mld snooping command.
The following example specifies to disable ipv6 mld snooping
report-suppression
function：
ECS2020-10P(config)# no ipv6 mld snooping
report-suppression
ipv6 mld snooping unknown-multicast action
Use this command to set the action to perform when receiving unknown-multicast packets.
ipv6 mld snooping unknown-multicast action (drop|flood|router-port)
flood
Global configuration
When mld and mld snooping is disabled,the action router port cannot be set.
When disabling mld snooping the unknown multicast action is will be set to flood. When the
action is drop, it will delete the unknown multicast group entry.
Use the ipv6 mld snooping unknown-multicast action command to set the unknown
multcast action. You can verify the settings by the show ipv6 mld snooping
command.
The following example specifies to set ipv6 mldunknown-multicast action to drop
within VLANs：
ECS2020-10P(config)# ipv6 mld snooping unknown-multicast action drop
Command
command
Description
show ipv6 mld snooping
Display the settings of ipv6 mld
snooping.
Parameter
parameter
description
(drop|flood|router-port)
Drop/flood within a VLAN or forward to a
router port.
Command
command
Description
show ipv6 mld snooping
Display the settings of ipv6 mld
snooping.
Usage
Example
Default
Mode
Usage
Example