ECS2020 Series CLI Reference Guide R04

123
Use the ipv6 mld snooping version command to change the MLD supported version.For
example, version 2 packets will not be processed if version 1 is.
You can verify the settings by using the show ipv6 mld snooping command.
The following example specifies to set ipv6 mld snooping version to version 2.
Switch(config)#ipv6 mld snooping version 2
ipv6 mld snooping vlan
Use this command to enable mld snooping on a specific VLAN. Input the ipv6 mld snooping vlan vlan-
list in Global configuration mode and use the "no" form of the command to disable the mld snooping
function per VLAN.
ipv6 mld snooping vlan VLAN-LIST
Disabled
Global configuration
Disabling the function will clear all ipv6 mld snooping dynamic group and dynamic router
ports and make all static ipv6 mld snooping invalid on a specified VLAN.The VLAN will no
longer learn dynamic group and router ports by mld messages afterwared.
Use the ipv6 mld snooping vlan command to enable mld snooping on a
VLAN. Use the no form of this command to disable it.
You can verify settings by the show ipv6 mld snooping vlan command.
The following example specifies to set ipv6 mld snooping on VLAN 2：
ECS2020-10P(config)# ipv6 mld snooping vlan 2
Command
command
Description
show ipv6 mld snooping
Display the settings of ipv6 mld
snooping.
Parameter
parameter
description
VLAN-LIST
Specifies a VLAN ID list to set
Command
command
Description
show ipv6 mld snooping
Display the settings of ipv6 mld
snooping.
Example
Usage
Default
Mode
Usage
Example