ECS2020 Series CLI Reference Guide R04

120
The following example specifies to show the ip igmp snooping groups
test. ECS2020-10P#show ip igmp snooping groups
VLAN | Group IP Address | Type | Life(Sec) | Port
------+------------------+--------+-----------+------------------
1 | 239.1.1.1 | Static| -- | gi0/3
1 | 239.255.255.250 | Dynamic| 253 | gi0/1
Total Number of Entry = 2
show ip igmp snooping mrouter
Use this command to display the igmp snooping mrouter configuration by port.
show ip igmp snooping mrouter [counters|dynamic|static]
Null
Privileged EXEC
This command will display ip igmp snooping
mrouter ports configured as
dynamic, static or
both types.
The following example specifies to show the ip igmp snooping mrouter
configuration for both dynamic and staticly configured ports.
ECS2020-10P#show ip igmp snooping mrouter
VID | Port | type | Expiry Time(Sec)
------+---------+---------+------------------
1 | gi0/8 | Static | ---
Total Entry 1
Command
Command
Description
Show ip igmp snooping
groups
Display the igmp snooping groups
configuration.
Parameter
Parameter
Description
None
Shows all ip igmp snooping mrouter configuration
including both dynamic and static ports.
(dynamic|static)
Display either dynamic or static igmp mrouter
configured ports.
Command
Command
Description
Show ip igmp snooping
mrouter
Displays the mrouter port configuration.
Example
Default
Mode
Usage
Example