ECS2020 Series CLI Reference Guide R04

116
The following example specifies that show ip igmp snooping statistics test.
ECS2020-10P#clear ip igmp snooping statistics
ECS2020-10P#show ip igmp snooping statistics
ECS2020-10P#show ip igmp snooping statistics
Packet Statistics
Total RX : 0
Valid RX : 0
Invalid RX : 0
Other RX : 0
Leave RX : 0
Report RX : 0
General Query RX : 0
Special Group Query RX : 0
Special Group & Source Query RX : 0
Leave TX : 0
Report TX : 0
General Query TX : 0
Special Group Query TX : 0
Special Group & Source Query TX : 0
clear ip igmp snooping groups
Use this command to clear igmp snooping groups.
clear ip igmp snooping groups [(dynamic|static)]
Null
.
Privileged EXEC
This command will clear the igmp groups for dynamic or static or all group
types. You can verify settings by using the show ip igmp snooping groups
command.
Command
Command
Description
Show ip igmp snooping
statistics
Verify the igmp snooping statistics info
Parameter
Parameter
Description
None
Clears all the ip igmp groups including dynamic and
static.
(dynamic|static)
ip igmp groups are either dynamic or static.
Default
Mode
Usage