ECS2020 Series CLI Reference Guide R04

111
ip igmp snooping vlan querier max-response-time
Use this command to set the IGMP snooping querier maximum response time.
ip igmp snooping vlan VLAN-LIST querier max-response-time <5-20>
no ip igmp snooping vlan VLAN-LIST querier max-response-time
10
Global configuration
Use the ip igmp snooping vlan querier max-response-time command to set
maximum response-time.
Use the no form of this command to restore it to default.
You can verify settings by the show ip igmp snooping vlan command.
The following example specifies to set the ip igmp snooping querier max-response-time：
ECS2020-10P(config)#
ip igmp snooping vlan 2 querier
max-response-time 20
ip igmp snooping vlan querier query-interval
Use this command to set the igmp snooping querier interval between each query.
ip igmp snooping vlan VLAN-LIST querier query-interval <30-18000>
no ip igmp snooping vlan VLAN-LIST querier query-interval
Parameter
Parameter
Description
VLAN-LIST
Specifies VLAN ID list to set.
last-member-query-interval <5-
20>
Specifies a response time to set.
Command
Command
Description
Show ip igmp snooping
Display the IGMP snooping settings.
Parameter
Parameter
Description
VLAN-LIST
Specifies VLAN ID list to set.
query-interval <5-20>
Specifies a response time to set.
Default
Mode
Usage
Example