ECS2020 Series CLI Reference Guide R04

103
Ip igmp snooping fast-leave
Used to enable the igmp snooping fast-leave function. If there is only one member of the group
and a device receives a leave report from a member, the group will leave immediately.
ip igmp snooping fast-leave
Default is disable.
Global configuration
.
Use the ip igmp snooping fast-leave enable command to enable fast-leave function.
Use the no form of this command to disable it/
You can verify settings by the show ip igmp snooping vlan command.
The following example specifies tha set ip igmp snooping fast-leave test：
ECS2020-10P(config)# ip igmp snooping fast-leave
ip igmp snooping suppression
Used to enable the igmp snooping suppression function. A router port will just forward one report
packet when it receives many of the same group join packets. This function is invalid in IGMP
snooping v3.
ip igmp snooping
suppression
Disabled
Parameter
Parameter
Description
None
None
Command
Command
Description
Show ip igmp snooping vlan
Displays the IGMP snooping settings.
Parameter
Parameter
Description
None
None
Default
Mode
Usage
Example
Default