ECS2020 Series Web Management Guide R04

66
Click the "Fault/Safety" "IGMP Snooping", click "ON" button to disable multicast monitoring function:
Figure 6-43: Closed Multicast Listener Function Operation
6.8.4 Configuration multicast routing
Click the "Fault/Safety" "IGMP" “RouterPort,” select the VLAN, click "Router Port Add" button, to configure the
multicast routing in the port panel:
Figure 6-44: Configuration of Multicast Routing
Multicast routing configuration steps are as follows:
Step 1: In the port panel to select multicast listener routing port;
Step 2: Select VLAN;
Step 3: Click on the "Add Router Port" button to complete the configuration.
6.8.5 IGMP Version
Click the "Fault/Safety" "IGMP Snooping", set the IGMP version of the page: