ECS2020 Series Web Management Guide R04

119
8.1.2.2 Configure power supply mode to static
Click on the navigation bar "PSE System Management" "PSE System Configuration" to configure power supply mode
to static mode
Figure 8-3: Static Mode
To configure the switch PSE System steps as follows:
Step 1: In the power supply mode, choose static mode;
Step 2: Click on "Apply Settings" button to complete the configuration.
8.1.2.3 Configure power supply mode to energy saving
Click on the navigation bar "PSE System Management" "PSE System Configuration" to configure power supply mode
to energy saving mode