ECS2020 Series Web Management Guide R04

115
7.11 LOG SERVER
Click on "System Management" "Log Server" to configure a Syslog server.
Figure 7-59: Log Server
To configure Log Server settings, follow these steps:
Step 1: Enter the IPv4 address of the Syslog server.
Step 2: Specify the UDP port number for the Syslog server.
Step 3: Specify the Facility and severity level of log messages to send to the server.
Step 4: Click the "Apply" button to complete the configuration.
7.12 STATIC ROUTE
Click on "System Management" "Static Route" to configure static routes.
Figure 7-60: Static Route