ECIS4500 series Web Management Guide R02

Command Descriptions
95
Port Mode Configuration
Specify IP Source Guard is enabled on which ports. Only when both Global Mode and
Port Mode on a given port are enabled, IP Source Guard is enabled on this given port.
Max Dynamic Clients
Specify the maximum number of dynamic clients that can be learned on given port.
This value can be 0, 1, 2 or unlimited. If the port mode is enabled and the value of
max dynamic client is equal to 0, it means only allow the IP packets forwarding that
are matched in static entries on the specific port.
Buttons
Click to save changes.
Click to undo any changes made locally and revert to previously saved
values.
Click to translate all dynamic entries to static entries.