ECIS4500 series Web Management Guide R02

Command Descriptions

ActiPHY

Link down power savings enabled.

ActiPHY works by lowering the power for a port when there is no link. The port is

power up for short moment in order to determine if cable is inserted.

PerfectReach

Cable length power savings enabled.

PerfectReach works by determining the cable length and lowering the power for ports

with short cables.

EEE

Controls whether EEE is enabled for this switch port.

For maximizing power savings, the circuit isn't started at once transmit data is ready

for a port, but is instead queued until a burst of data is ready to be transmitted. This

will give some traffic latency.

If desired it is possible to minimize the latency for specific frames, by mapping the

frames to a specific queue (done with QOS), and then mark the queue as an urgent

queue. When an urgent queue gets data to be transmitted, the circuits will be

powered up at once and the latency will be reduced to the wakeup time.

EEE Urgent Queues

Queues set will activate transmission of frames as soon as data is available.

Otherwise the queue will postpone transmission until a burst of frames can be

transmitted.

Buttons

Click to save changes.

Click to undo any changes made locally and revert to previously saved values.