ECIS4500 series Web Management Guide R02

256
IP Address
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this
server.
Status
The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled, but will
get re-enabled when the dead-time expires. The number of seconds left before this
occurs is displayed in parentheses. This state is only reachable when more than one
server is enabled.
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Click to refresh the page immediately.