ECIS4500 series Web Management Guide R02

172
2.3.95 Group to VLAN
This page allows you to map a already configured Group Name to a VLAN for the switch.
Object
Description
Delete
To delete a Group Name to VLAN map entry, check this box. The entry will be deleted
on the switch during the next Save.
Group Name
A valid Group Name is a string at the most 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers(0-9), no special character is
allowed. whichever Group name you try map to a VLAN must be present in Protocol
to Group mapping table and must not be pre-used by any other existing mapping
entry on this page.
VLAN ID
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from
1-4095.
Port Members
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New Group to
VLAN mapping entry
Click to add a new entry in mapping table. An empty row is
added to the table, the Group Name, VLAN ID and port members can be configured
as needed. Legal values for a VLAN ID are 1 through 4095.
The button can be used to undo the addition of new entry. The maximum
possible Group to VLAN mappings are limited to 64.
Buttons