ECIS4500 Series CLI Reference Guide R02

53
3.6 RingV2 Group Mode Commands
3.6.1 ringv2 protect
Description
To configure ring protection.
Syntax
ring protect
Parameter
Name
Description
group1
Configure ring protection v2 group1 (Ring)
group2
Configure ring protection v2 group2 (Ring)
group3
Configure ring protection v2 group3 (Chain)
3.6.2 guard-time
Description
Set guard time
Syntax
guard-time { <ringGuardTimerDef> }
Parameter
Name
Description
ringGuardTimerDef
<10-3600>, unit: secound. Default is 10 secounds
3.6.3 mode
Description
Enable/Disable ring group
Syntax
mode { disable | enable }
Parameter
Name
Description
disable
Set the specified Ring group to Disabled
enable
Set the specified Ring group to Enabled
3.6.4 node1 interface GigabitEthernet <portNo>}
Description
Set interface of ring protection node
Syntax
node1 interface GigabitEthernet <portNo>
Parameter
Name
Description
<portNo>
Valid values: 1~max port index.
3.6.5 node2 interface GigabitEthernet <portNo>}
Description
Set interface of ring protection node
Syntax
Node2 interface GigabitEthernet <portNo>
Parameter
Name
Description
<portNo>
Valid values: 1~max port index.
3.6.6 role
Description
Set role for group
Syntax
role { ring-master | ring-slave | coupling-primary | coupling-backup |
dual-homing | chain-head | chain-tail | chain-member |
b-chain-terminal-1 | b-chain-terminal-2 | b-chain-central-block |
b-chain-member}
Parameter
Name
Description
ring-master
Set role to ring master
ring-slave
Set role to ring slave
coupling-primary
Set role to coupling primary
coupling-backup
Set role to coupling backup