ECIS4500 Series CLI Reference Guide R02

22
3.2.49 show sflow
Description
Sflow information
Syntax
show sflow
show sflow statistics { receiver [ <rcvr_idx_list> ] | samplers [ interface
[ <samplers_list> ] ( <port_type> [ <v_port_type_list> ] ) ] }
Parameter
Name
Description
receiver
Show statistics for receiver
samplers
Show statistics for samplers
interface
Interface
port_type
GigabitEthernet, 1 Gigabit Ethernet Port
v_port_type_list
<port_type_list> Port list in 1/1-14
3.2.50 show snmp
Description
SNMP information
Syntax
show snmp
show snmp access [ <group_name> { v1 | v2c | v3 | any } { auth | noauth
| priv } ]
show snmp community v3 [ <community> ]
show snmp host [ <conf_name> ] [ system ] [ switch ] [ interface ] [ aaa ]
show snmp mib context
show snmp mib ifmib ifIndex
show snmp security-to-group [ { v1 | v2c | v3 } <security_name> ]
show snmp user [ <username> <engineID> ]
show snmp view [ <view_name> <oid_subtree> ]
Parameter
Name
Description
access
access configuration
group_name
<GroupName : word32> group name
any
any security model
v1
v1 security model
v2c
v2c security model
v3
v3 security model
auth
authNoPriv Security Level
noauth
noAuthNoPriv Security Level
priv
authPriv Security Level
community
Community
community
<Community : word127> Specify community name
host
Set SNMP host's configurations
conf_name
<ConfName : word32> Name of the host
configuration
aaa
AAA event group
interface
Interface event group
switch
Switch event group
system
System event group
mib
MIB(Management Information Base)
context
MIB context
ifmib
IF-MIB
ifIndex
The IfIndex that is defined in IF-MIB
security-to-group
security-to-group configuration
security_name
<SecurityName : word32> security group name
user
User
username
<Username : word32> Security user name
engineID
<Engiedid : word10-32> Security Engine ID