ECIS4500 series Web Management Guide R02

66
2.3.39 Network
2.3.40 Limit Control
This page allows you to configure the Port Security Limit Control system and port settings.
Limit Control allows for limiting the number of users on a given port. A user is identified by a MAC
address and VLAN ID. If Limit Control is enabled on a port, the limit specifies the maximum number of
users on the port. If this number is exceeded, an action is taken. The action can be one of the four
different actions as described below.
The Limit Control module utilizes a lower-layer module, Port Security module, which manages MAC
addresses learnt on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide.
Object
Description
System Configuration
Mode
Indicates if Limit Control is globally enabled or disabled on the switch. If globally