ECIS4500 Series CLI Reference Guide R02

44
3.3.71 mac address-table aging-time <time>
Description
Configure aging time for a bridge port.
Syntax
mac address-table aging-time <time>
Parameter
Name
Description
<time>
Valid values: 10 ~ 1000000 (seconds), 0: disable aging
Type: Mandatory
3.3.72 mtu <value>
Description
MTU size.
Syntax
mtu <value>
Parameter
Name
Description
<value>
Range.
Valid values: 1536~9000 (bytes)
Type: Mandatory
3.3.73 media-type
Description
Configure media-type
Syntax
media-type { rj45 | sfp | dual }
Parameter
Name
Description
rj45
rj45 interface (copper interface).
sfp
sfp interface (fiber interface).
dual
Dual media interface (cu & fiber interface).
3.3.74 monitor destination interface
Description
The destination port. That is the port that trafficed should be mirrored to.
Syntax
monitor destination interface <port_type> <port_type_id>
Parameter
Name
Description
<port_type
Port type
<port_type_id>
Port Number
3.3.75 monitor source interface
Description
Mirror Interface traffic
Syntax
monitor source { { interface ( <port_type> [ <v_port_type_list> ] ) }
Parameter
Name
Description
port_type
1 Gigabit Ethernet Port
v_port_type_lis
Port list
3.3.76 monitor source cpu
Description
Mirror Interface traffic
Syntax
monitor source { cpu [ <cpu_switch_range> ] } } { both | rx | tx }
Parameter
Name
Description
both
Setting source port to both will mirror both ingress and egress
traffic
rx
Setting source port to rx will mirror ingress traffic
tx
Setting source port to tx will mirror egress traffic