ECIS4500 series Web Management Guide R02

322
2.6.3.2 Image select
This page provides information about the active and alternate (backup) firmware images in the device,
and allows you to revert to the alternate image.
The web page displays two tables with information about the active and alternate firmware images.
Note:
1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In
this case, the Activate Alternate Image button is also disabled.
2. If the alternate image is active (due to a corruption of the primary image or by manual intervention),
uploading a new firmware image to the device will automatically use the primary image slot and
activate this.
3. The firmware version and date information may be empty for older firmware releases. This does not
constitute an error.
Object
Description