ECIS4500 series Web Management Guide R02

Command Descriptions

Object

Description

The identification of the Alarm Profile entry.

Description

Alarm Type Description.

Enabled

If alarm entry is Enabled, then alarm will be shown in alarm history/current when it

occurs.

Alarm LED will be on (lighted), Alarm Relay also be enabled.

SNMP trap will be sent if any SNMP trap entry exists and enabled.

Disabled

If alarm entry is Disabled, then alarm will not be captured/shown in alarm

history/current when alarm occurs;

then it will not trigger the Alarm LED change, Alarm Relay and SNMP trap either.

Note: When any alarm exists, the Alarm LED will be on (lighted), Alarm Output Relay will also be

enabled.

Buttons

Click to save changes.

Click to undo any changes made locally and revert to previously saved values.