ECIS4500 series Web Management Guide R02

52
2.3.29 SNMP Communities
Configure SNMPv3 community table on this page. The entry index key is Community.
Object
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Community
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to
126. The community string will be treated as security name and map a SNMPv1 or
SNMPv2c community string.
Source IP
Indicates the SNMP access source address. A particular range of source addresses
can be used to restrict source subnet when combined with source mask.
Source Mask
Indicates the SNMP access source address mask.
Buttons
Click to add a new community entry.
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.