ECIS4500 series Web Management Guide R02

2.3.11 DHCP

2.3.12 DHCP Server

2.3.13 DHCP Server Mode

This page configures global mode and VLAN mode to enable/disable DHCP server per system and per

VLAN.

Object

Description

Global Mode

Mode

Configure the operation mode per system. Possible modes are:

Enabled: Enable DHCP server per system.

Disabled: Disable DHCP server pre system.

VLAN Mode

VLAN Range

Indicate the VLAN range in which DHCP server is enabled or disabled. The first VLAN

ID must be smaller than or equal to the second VLAN ID. BUT, if the VLAN range

contains only 1 VLAN ID, then you can just input it into either one of the first and

second VLAN ID or both.

On the other hand, if you want to disable existed VLAN range, then you can follow the