ECIS4500 series Web Management Guide R02

294
Priority
Priority is the Layer 2 priority to be used for the specified application type. One of the
eight priority levels (0 through 7).
DSCP
DSCP is the DSCP value to be used to provide Diffserv node behavior for the
specified application type as defined in IETF RFC 2474. Contain one of 64 code point
values (0 through 63).
Auto-negotiation
Auto-negotiation identifies if MAC/PHY auto-negotiation is supported by the link
partner.
Auto-negotiation status
Auto-negotiation status identifies if auto-negotiation is currently enabled at the link
partner. If Auto-negotiation is supported and Auto-negotiation status is disabled,
the 802.3 PMD operating mode will be determined the operational MAU type field
value rather than by auto-negotiation.
Auto-negotiation
Capabilities
Auto-negotiation Capabilities shows the link partners MAC/PHY capabilities.
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Click to refresh the page.